menu
Faramarz Fereshteh-Saniee

Professor

Update: 2024-11-21

Faramarz Fereshteh-Saniee

Faculty of Engineering / Department of Mechanical Engineering

Journal Paper

  1. "Inclusive anisotropy and texture analyses ofAZ91 Mg sheets subjected to various passesof elevated-temperature constrainedgroove pressing"
    Faramarz Fereshteh-Saniee, صادق قربانحسيني, Ali Sonboli
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, Vol. , 2023
  2. "Superior combined strength and elongation by conducting elevatedtemperature constrained groove pressing on Al–Mg–Mn sheets"
    علي احمدي جبلي, Faramarz Fereshteh-Saniee
    MATERIALS CHEMISTRY AND PHYSICS, Vol. , 2023
  3. "Textural and microstructural analyses and rankingof the process parameters in hydro-mechanicaldeep drawing of AZ31B magnesium sheets"
    Faramarz Fereshteh-Saniee, سعيد يعقوبي
    Journal of Materials Research and Technology-JMR&T, Vol. , pp.9261-9272, 2023
  4. "Microstructure and hot shear deformation behavior of a fine-grained AA5083 aluminum alloy"
    نعيمه فخار, احسان خادمي, Mahdi Sabbaghian, ّamir momeni, Faramarz Fereshteh-Saniee, Abel Szabo, Peter Nagy, Jeno Gobicza
    MATERIALS CHEMISTRY AND PHYSICS, Vol. , 2023
  5. "Optimal Experiment Selection in Hydroforming Process of Bimetallic Sheets UsingCRITIC, MEREC and TOPSIS Techniques"
    سعيد يعقوبي, مسعود صفري, Faramarz Fereshteh-Saniee
    Iranian Journal of Materials Forming, Vol. , pp.13-25, 2023
  6. "EFFECTS OF PROCESS VARIABLES ON THE UNIFORMITY OF AL-ST AND AL-MG LAMINATED COMPOSITE CUPS PRODUCED BY HYDRO-MECHANICAL DEEP DRAWING OPERATION"
    سعيد يعقوبي, Faramarz Fereshteh-Saniee
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, Vol. , pp.424-434, 2023
  7. "EFFECTS OF MOLD ROTATION SPEED AND CAST THICKNESS ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AZ80 PREPARED BY CENTRIFUGAL CASTING"
    مهدي عربي نور, Faramarz Fereshteh-Saniee
    International Journal of Metalcasting, Vol. , pp.894-908, 2022
  8. "A comprehensive comparison between the effect of elevated temperature constrained groove pressing on the microstructural evolutions, crystallographic texture, and mechanical properties of Al 2024 and Mg AZ91D alloys"
    Faramarz Fereshteh-Saniee, صادق قربانحسيني, سعيد يعقوبي
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, Vol. , pp.463-472, 2022
  9. "A comprehensive study on soundness, microstructure, and uniformity of 2024 aluminum cups hydro‑mechanically drawn at elevated temperatures"
    سعيد يعقوبي, Faramarz Fereshteh-Saniee
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. , pp.7905-7917, 2022
  10. "Optimization of the geometrical parameters for elevated temperature hydro-mechanical deep drawing process of 2024 aluminum alloy"
    سعيد يعقوبي, Faramarz Fereshteh-Saniee
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, Vol. , pp.151-161, 2021
  11. "Influence of roll speed difference on microstructure, texture and mechanical properties of 7075 aluminum plates produced via combined continuous casting and rolling process"
    محمدمهدي اميري, Faramarz Fereshteh-Saniee
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, Vol. , pp.901-912, 2021
  12. "An investigation on the effects of the process parameters of hydro-mechanical deep drawing on manufacturing high-quality bimetallic spherical-conical cups"
    سعيد يعقوبي, Faramarz Fereshteh-Saniee
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. , pp.1805-1818, 2020
  13. "Development of new fiber textures for enhancing mechanical properties of 2024 Al alloy using elevated-temperature constrained groove pressing"
    صادق قربانحسيني, Faramarz Fereshteh-Saniee, Ali Sonboli
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. , 2020
  14. "An experimental investigation on the influence of elevated-temperature constrained groove pressing on the microstructure, mechanical properties, anisotropy and texture of 2024 Al sheets"
    Faramarz Fereshteh-Saniee, صادق قربانحسيني, Ali Sonboli
    JOURNAL OF ALLOYS AND COMPOUNDS, Vol. , 2020
  15. "An Experimental Investigation on the Effect of Cooling Rate During Combined Continuous Casting and Rolling Process on Mechanical Properties of 7075 Aluminum Alloy"
    Faramarz Fereshteh-Saniee, محمدمهدي اميري
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, Vol. , pp.441-448, 2020
  16. "Influence of Combined Severe Plastic Deformationand Sheet Extrusion Process on the SuperplasticFormability of AA 5083 Aluminum Alloy Assessed by FreeBulge Test"
    Faramarz Fereshteh-Saniee, نعيمه فخار, Reza Mahmudi
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. , 2019
  17. "Multi-objective optimization of geometrical parameters forconstrained groove pressing of aluminium sheet using a neuralnetwork and the genetic algorithm"
    صادق قربانحسيني, Faramarz Fereshteh-Saniee
    Journal of Computational Applied Mechanics, Vol. , pp.275-281, 2019
  18. "An Inclusive Experimental Investigation on Influences of Different Process Parameters in Warm Incremental Forming of AZ31 Magnesium Sheets"
    حسين خزاعلي, Faramarz Fereshteh-Saniee
    Iranian Journal of Science and Technology-Transactions of Mechanical Engineering, Vol. , pp.347-358, 2019
  19. "Process Parameter Enhancement for Incremental Forming of TitaniumTi–6Al–4V Truncated Cone with Varying Wall Angle at ElevatedTemperatures"
    حسين خزاعلي, Faramarz Fereshteh-Saniee
    International Journal of Precision Engineering and Manufacturing, Vol. , 2019
  20. "An Investigation on the Effects of Optimum Forming Parameters in Hydro-mechanical Deep Drawing Process Using the Genetic Algorithm"
    Faramarz Fereshteh-Saniee, سعيد يعقوبي
    Journal of Computational Applied Mechanics, Vol. , pp.54-62, 2018
  21. "Shear behavior of AZ80 Mg alloy usingexperimental, theoretical and numerical techniques"
    Faramarz Fereshteh-Saniee, A. Banafshi
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, Vol. , 2018
  22. "Application of the Taguchi method for efficient studyingof elevated-temperature incremental forming of a titanium alloy"
    Faramarz Fereshteh-Saniee, حسين خزاعلي
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. , pp.43-52, 2018
  23. "A new experimental-numerical approach for studying the effects of gas pressure profile on superplastic forming characteristics of Al-Mg5.6 alloy"
    نعيمه فخار, M. asgari, Reza Mahmudi, Faramarz Fereshteh-Saniee
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. , 2017
  24. "Significant improvements in mechanical properties ofAA5083 aluminum alloy using dual equal channel lateral extrusion"
    نعيمه فخار, Faramarz Fereshteh-Saniee, Reza Mahmudi
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, Vol. , 2016
  25. "Superior ductility and strength enhancement of ZK60 magnesiumsheets processed by a combination of repeated upsetting and forwardextrusion"
    Faramarz Fereshteh-Saniee, نعيمه فخار, فهيمه كرمي, Reza Mahmudi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. , 2016
  26. "Specialized mechanical properties of pure aluminum by usingnon-equal channel angular pressing for developing its electricalapplications"
    M. asgari, Faramarz Fereshteh-Saniee, نعيمه فخار
    APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, Vol. , pp.779-790, 2016
  27. "Non-equal channel angular pressing (NECAP) of AZ80 Magnesium alloy:Effects of process parameters on strain homogeneity, grain refinement andmechanical properties"
    M. asgari, Faramarz Fereshteh-Saniee, S.M. Pezeshki, M. Barati
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. , 2016
  28. "Production of AZ80/Al composite rodsemploying non-equal channel lateral extrusion"
    M. asgari, Faramarz Fereshteh-Saniee
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, Vol. , 2016
  29. "A comprehensive experimental investigation on the influencesof the process variables on warm incremental formingof Ti-6Al-4V titanium alloy using a simple technique"
    حسين خزاعلي, Faramarz Fereshteh-Saniee
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. , 2016
  30. "Optimized tool design for expansion equal channel angularextrusion (Exp-ECAE) process using FE-based neural networkand genetic algorithm"
    Faramarz Fereshteh-Saniee, سعيد سپاهي بروجني, A. Sepahi-Boroujeni
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. , 2016
  31. "High strain-rate superplasticity of fine- and ultrafine-grained AA5083 aluminum alloy at intermediate temperatures"
    نعيمه فخار, Faramarz Fereshteh-Saniee, Reza Mahmudi
    Materials and Design, Vol. , 2015
  32. "An Experimental Investigation on the Strain Rate Sensitivityof a Severely Deformed Aluminum Alloy"
    Faramarz Fereshteh-Saniee, سعيد سپاهي بروجني, Saeed lahmi, Gholam Hossein Majzoobi
    EXPERIMENTAL MECHANICS, Vol. , 2015
  33. "Expansion equal channel angular extrusion, as a novel severeplastic deformation technique"
    سعيد سپاهي بروجني, Faramarz Fereshteh-Saniee
    JOURNAL OF MATERIALS SCIENCE, Vol. , 2015
  34. "The influences oftheexpansionequalchannelangularextrusionoperationonthestrengthandductilityofAZ80magnesiumalloy"
    سعيد سپاهي بروجني, Faramarz Fereshteh-Saniee
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. , 2015
  35. "Microstructure and mechanical properties of Mg/SiC and AZ80/SiC nano-composites fabricated through stir casting method"
    Afshin Matin, Faramarz Fereshteh-Saniee, H.R. abedi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. , pp.81-88, 2015
  36. "Effects of die geometry on non-equal channel lateral extrusion )NECLE) ofAZ80 magnesium alloy"
    Faramarz Fereshteh-Saniee, M. asgari, M. Barati, S.M. Pezeshki
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, Vol. , pp.3274-3284, 2014
  37. "Mechanical properties improvement of cast AZ80Mg alloy/nano-particles composite via thermomechanical processing"
    H. Khoshzaban Khosroshahi, Faramarz Fereshteh-Saniee, H.R. abedi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. , pp.284-290, 2014
  38. "مطالعات ريزساختاري و خواص مكانيكي فرآيند هيدروفرمينگ ورق هاي آلياژي منيزيم AZ31B و آلومينيم AA2024 در دماهاي بالا"
    Faramarz Fereshteh-Saniee, سعيد يعقوبي, صادق قربانحسيني
    مهندسي ساخت و توليد, Vol. , pp.39-48, 2021
  39. "بررسي تأثيرات متغيّرهاي فرايند در شكل دهي تدريجي گرم تيتانيمTi-6Al-4V"
    Faramarz Fereshteh-Saniee, حسين خزاعلي
    مهندسي مكانيك دانشگاه تبريز, Vol. , pp.77-86, 2018

Conference Paper

  1. "Impacts of elevated-temperature constrained groove pressing on the mechanical properties and microstructure of light-weight alloy sheets"
    Faramarz Fereshteh-Saniee, صادق قربانحسيني
    ICME2019, 2019
  2. "مطالعۀ تجربي تأثيرات فرآيند اكستروژن جانبي در كانالهاي نامساوي و نانو ذرات 3O2Al بر ميزانسختي و اندازه دانه آلياژ منيزيم AZ80"
    رضا قاسمي, Faramarz Fereshteh-Saniee
    ICME2023, 2023
  3. "تأثير فرآيند اكستروژن مستقيم بر خواص مكانيكي دو آلياژ زيستتخريبپذير منيزيمي نوع ZK"
    رحمان مقصودي, Faramarz Fereshteh-Saniee
    ICME2023, 2023